¿No ha encontrado la maquinaria que usted busca? Pregunta por ello
APT International tiene 20.000 m² de existencias en Bélgica y 3.000 máquinas disponibles inmediatamente.
¿No ha encontrado la maquinaria que usted busca? Pregunta por ello

Sack/Schneider-Creusot hot strip mill 2100 x 12,5 mm

Información adicional

  • 8 stands: 2 reversing roughing stands & 6 continuous finishing stands
    Input: slabs
    Max output width: 2100 mm!!
    Output thickness: 2 > 12,5 mm
    Output: 4 million tons per year

    Total weight of equipment: 20 000 ton (estimated)
    Equipment located in factory in Belgium
    Equipment has been upgraded mechanically and electrically many times, last big update done in 1998. Plant was functional until October 2012.


    1 – Furnace: for heating up slabs up to max 1270° C
    2 – heated slabs exit the furnace and are transported via motorized rollerconveyors to the 2 reversing roughing stands
    3 – Two reversing roughing stands:
                    > 2 vertical cages: 1250 kW & 1500 kW
                    > 1 horizontal cage: 10 470 kW
                    > Max width reduction in one pass: 140 mm

    4 – Slabs continue on motorized rollerconveyors to the finishing stands
    5 – Six finishing stands:
                    > 6 vertical cages: each cage consists of 2 big workrolls and 2 smaller support rolls
                    > Each set of support rolls is powered by an 8000 HP motor
                    > 6 MW power per cage / 3000 ton
                    > Max speed: 16 m/sec
    6 – Finished product passes on motorized rollerconveyors to water cooling table
                    > 150 meters long
                    > 5000 m3 water/hour
                   > 1450 nozzles, max pressure 4,5 bar
    7 – After cooling the product goes to the trimmer and gauge station
    8 – After trimming the product can be coiled
                   > 2 coiling stations
                  > Max weight: 35 ton
    9 – Finished coils are transported on a conveyor system to a packaging & marking line



  • Tipo/Modelo: hot strip mill 2100 x 12,5 mm
  • Numéro stock: O.27 12641
  • Categoría principal: [O] Curvadoras, enderezadoras, punzonadoras, máquinas de oxicorte y láser y líneas de conformado
  • Subcategoría: [O.27] Devanadoras y líneas de conformado
  • Marca: Sack/Schneider-Creusot

Numéro stock: O.27 12641

Promociones en su buzón
Prueba nuestro nuevo Alert Service