This continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs.
The hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and then through 5 finishing stands which reduces them to a thickness range from 1,5 to 10,5 mm.
Material: carbon steel & stainless steel
2 000 000 ton per year capacity = 166 666 ton per month capacity
Input slab thickness range: 150 > 250 mm
Input slab width range: 600 > 1560 mm
Input slab length range: 4900 > 5500 mm
Output plate thickness range: 1,5 > 10,5 mm
Output plate width range: 600 > 1564 mm
Total roughing mill power: 12000 hp
Total finishing mill power: 23500 hp
Previous owner: Usinor FR (now Arcelor)
Equipment was dismantled by Usinor. Cleaning & reconditionning by Danieli.
Currently stored in the port of Antwerp & packaged ready for transport
Total net weight of equipment: 4337 ton – 5652 m3
>> Roughers
R1 - 4HI UNITED Roughing mill stand 33”/ 51” x 66” (no pinion stand, no gearbox and no motor)
R2 - 4HI CLECIM Roughing mill stand 36”/ 53” x 66” with gearbox (1:6.32), 2x 4,000 Hp at 145 - 290 Rpm DC motors with reactance (no pinion stand)
R3 - 4HI UNITED Roughing mill stand 32”/ 53” x 66” with gearbox (1:9.71), 2x 4,000 Hp at 500 Rpm AC Synchronous motors with reactance (no pinion stand)
>> Finishing mills
F1 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:5.61), 1x 4500 Hp at 200 - 355 Rpm DC motors with reactance
F2 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:3.17), 1x 5000 Hp at 171 - 345 Rpm DC motors with reactance
F3 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:1.90), 1x 5000 Hp at 155 - 310 Rpm DC motors with reactance
F4 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand - direct driven, 1x 5000 Hp at 108 - 230 Rpm DC motors with reactance
F5 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand - direct driven, 1x 4000 Hp at 135 - 270 Rpm DC motors with reactance
>> Roll grinders (optional)
28” CINCINNATI Roll grinding machine
- max dia of rolls: 710 mm
- max distance between peaks: 4270 mm
- rotational motion of wheel: 25/30 hp – 600/800 rpm
- head: 7,5 hp – 400/1600 rpm
44” FARREL Roll grinding machine
- max dia of rolls: 1140 mm
- max distance between peaks: 4300 mm
- forward motion of the grinding wheel: 2 hp – 1150 rpm
- rotational motion of wheel: 40 hp – 1450/575 rpm
- head: 15 hp – 300/1200 rpm
- transmission: 3/5 hp – 300/1800 rpm
Approximalty 20 rollers between the roughers