¿No ha encontrado la maquinaria que usted busca? Pregunta por ello
APT International tiene 20.000 m² de existencias en Bélgica y 3.000 máquinas disponibles inmediatamente.
¿No ha encontrado la maquinaria que usted busca? Pregunta por ello

Froriep Ø 4000 x 13 000 mm

Información téchnico

  • Distancia entre centros 13 000 mm
  • Volteo sobre bancada 4000 mm
  • Volteo sobre carro transversal2220 mm
  • Diámetro agujero husillo principal95 mm
  • Potencia eje principal70 kW
  • Peso140 ton
  • Maximo peso entre centros100 ton

Información adicional

  • Special lathe for turning turbine shafts / large pulleys / large rotors / large pistons
    Type: DS 2000-13/IV

    Lathe is equipped with 2 cross-slides:
    - one is mounted on a chassis bed installed next to the main chassis of the lathe
    - one is mounted on an upper chassis bed on top of the main chassis of the lathe
    - the upper chassis bed is also movable on top of the main chassis of the lathe

    Max length of workpiece on main chassis: 13 meter
    Max length of workpiece on top of upper chassis bed: 6,5 meter
    Max swing in gap using main cross-slide: 4000 mm
    Max swing over bed using using secondary cross-slide: 2700 mm
    Max swing over cross-slide: 2220 mm


  • Tipo/Modelo: Ø 4000 x 13 000 mm
  • Numéro stock: A.01 12798
  • Categoría principal: [A] Tornos
  • Subcategoría: [A.01] Tornos con husillo de cilindrar y roscar
  • Marca: Froriep

Numéro stock: A.01 12798

Ver video de la maquinaria

Promociones en su buzón
Prueba nuestro nuevo Alert Service