Машина не найдена? Запросите информацию
Свяжитесь с нами +32 492 277 280
APT International имеет 20 000 м² акций в Бельгии и 3000 машин, доступных сразу.
Машина не найдена? Запросите информацию

Производственные линии

18 машины

Complete line for production of fire extinguishers (2-> 12 kg)

* Soenen Deepdraw Press
- Cap: 400 Ton
- Stroke: 850 mm
- Max opening: 1290 mm
- Table: 2200 x 1100 mm
Cap: 400 extinguishers/ 8 hours
* LVD EMF 250 Hydraulic Deepdraw Press
- Cap: 250 Ton
- Stroke: 850 mm
- Equipped with Decoiler, Straightener (cap: Width 550 mm)
Install- and Feedsystem
- Machine cuts the round plates for bottom/tops
Cap: 1500 pieces / 8hours.
* Cleaning installation Kermad
* Eccentric Press for nibbling the kneepart
* Marking unit
* Welding machine SOEYER
* Ringweldinginstallation SAF
* Assembly press with contour welding SAF (under powder)
* Kneewelding machine

5 машины

Production line for biodegradable pots

Produced from granules, fibres and binders of plant origin such as grain, grass, wood,... 
Pots can be placed in the ground and after a few months the pot will have entirely and naturally disappeared.

Line consists of:
- 3 Awax 100 ton presses
- 2 Lauffer 500 ton presses

Productionprocess:
1 - automatic dosage and prepressing of material
2 - heating of material and high pressure form pressing
3 - cooling of pots and automatic unloading


3 машины

Production line for tank bottoms

Complete set of machines for manufacturing tank bottoms for gas tanks, air tanks, tankertrucks,...

5 машины

Productionline for lighting fixtures

A complete productionline for the manufacturing of lighting fixtures. This equipment consists of 4 punch/press lines together with all of the tooling. Upon request we can send you the catalog show the products that were made by this company. Due to competition from Eastern Europe the company was forced to close it's business.

1 машины

Productionline for manufacturing concrete slabs (Stelcon)

Equipment for manufacturing 'Stelcon' prefab concrete slabs:
- 250 moulds
- Automatic pouring, vibration, stripping & stacking
- NOT included is the concrete mixinginstallation

8 машины

RediRack - Production line for manufacturing pallet racks

Complete production line for producing several types of pallet racks - beams (including all tools)

1st line - Soenen rollforming line + decoiler + flying cutting shear
max width: 400 mm
max thickness: 5 mm
12 stations heavy duty
double head decoiler > cap: 5 ton

2nd line - profilingline: decoiler + straightener + punching
max width: 150 mm
max thickness: 3 mm
6 stations

3rd line - Soenen rollforming line to produce U- & C-profiles, with Elmea double head decoiler & Raskin excenterpress with auto cutting tool
max thickness: 3 mm

1 машины

Wean United - Contin. hot strip rolling mill

This continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs. 

The hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and then through 5 finishing stands which reduces them to a thickness range from 1,5 to 10,5 mm. 

Material: carbon steel & stainless steel
2 000 000 ton per year capacity = 166 666 ton per month capacity
Input slab thickness range: 150 > 250 mm
Input slab width range: 600 > 1560 mm
Input slab length range: 4900 > 5500 mm
Output plate thickness range: 1,5 > 10,5 mm
Output plate width range: 600 > 1564 mm
Total roughing mill power: 12000 hp
Total finishing mill power: 23500 hp

Previous owner: Usinor FR (now Arcelor)
Equipment was dismantled by Usinor. Cleaning & reconditionning by Danieli.
Currently stored in the port of Antwerp & packaged ready for transport

Total net weight of equipment: 4337 ton – 5652 m3

>> Roughers
R1 - 4HI UNITED Roughing mill stand 33”/ 51” x 66” (no pinion stand, no gearbox and no motor)
R2 - 4HI CLECIM Roughing mill stand 36”/ 53” x 66” with gearbox (1:6.32), 2x 4,000 Hp at 145 - 290 Rpm  DC motors with reactance (no pinion stand)
R3 - 4HI UNITED Roughing mill stand 32”/ 53” x 66” with gearbox (1:9.71), 2x 4,000 Hp at 500 Rpm AC Synchronous motors with  reactance (no pinion stand) 

>> Finishing mills
F1 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:5.61), 1x 4500 Hp at 200 - 355 Rpm DC motors with reactance
F2 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:3.17), 1x 5000 Hp at 171  - 345 Rpm DC motors with reactance
F3 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:1.90), 1x 5000 Hp at 155  - 310 Rpm DC motors with reactance
F4 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 5000 Hp at 108 - 230 Rpm DC motors with reactance
F5 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 4000 Hp at 135 - 270 Rpm DC motors with reactance


>> 2 Roll grinders (optional)
1 - 28” CINCINNATI Roll grinding machine
- max dia of rolls: 710 mm
- max distance between peaks: 4270 mm
- rotational motion of wheel: 25/30 hp – 600/800 rpm
- head: 7,5 hp – 400/1600 rpm

2 - 44” FARREL Roll grinding machine 
- max dia of rolls: 1140 mm
- max distance between peaks: 4300 mm
- forward motion of the grinding wheel: 2 hp – 1150 rpm
- rotational motion of wheel: 40 hp – 1450/575 rpm
- head: 15 hp – 300/1200 rpm
- transmission: 3/5 hp – 300/1800 rpm

Approximalty 20 rollers between the roughers
Получать как первые рекламные акции в своем почтовом ящике
Попробуйте наш новый Оповещения