Vehicles (lift trucks - loading - cleaning etc) Emanuel railway lifting jacks 64 ton

EMANUEL SCM160 Mobile Railway Lifting Jacks – Set of 4

Professional mobile synchronized lifting system for railway rolling stock , consisting of 4 electromechanical lifting jacks , each with a lifting capacity of 16 tons .

The system is designed for lifting railway vehicles during maintenance, inspection and repair operations. All four lifting columns operate as a synchronized system and are controlled through a computerized central control unit installed on a mobile trolley.

Technical information:

- Manufacturer: EMANUEL
- Type: SCM160
- Number of lifting jacks: 4
- Lifting capacity per jack: 16 tons
- Total lifting capacity: 64 tons
- Lifting stroke: 1,700 mm
- Height of lifting point: 690 mm
- Lifting speed: 230 mm/min
- Descending speed: 230 mm/min
- Motor power per jack: 3 kW
- Installed total power: 24 kW
- Control: Computerized synchronized control system
- Control unit: Mounted on a mobile trolley


Control & Safety System

Each lifting jack is equipped with an absolute encoder for continuous monitoring of the lifting height and position.

The system incorporates multiple diagnostic and safety functions to ensure controlled and synchronized lifting of the railway vehicle.

Each column is equipped with sensors for:

- Continuous height-level detection
- Rotation monitoring
- Load detection
- Worn safety nut detection
- Obstacle detection underneath the lifting anvil
- Operational diagnostics and safety monitoring

The electronic synchronization system continuously monitors the individual lifting columns to maintain the correct lifting level during operation.


Additional information

The EMANUEL SCM160 is a mobile heavy-duty lifting system developed for railway maintenance applications. The individual columns can be positioned around the vehicle and connected to the central computerized control system.

With 4 × 16 tons lifting capacity , the complete set provides a total nominal lifting capacity of 64 tons .

The mobile design allows the lifting system to be repositioned within the workshop when required, making it suitable for maintenance facilities where a permanently installed lifting system is not desirable.

The combination of absolute position encoders, computerized synchronization and integrated safety sensors provides accurate and controlled lifting and lowering of railway rolling stock.

Complete set consisting of 4 mobile lifting jacks and computerized control unit on mobile trolley.